Adds a "parent" column option to the inbox column toggle dropdown.
When enabled, sub-issues display the parent's identifier (e.g. PAP-123)
with the parent title as a tooltip. Uses the existing issueById lookup
map to resolve parent info without additional API calls.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
- When no sub-issues exist, show "Add sub-issue" button alongside
"Upload attachment" and "New document" in the action row
- When sub-issues exist, show them in a dedicated section above
Documents with "Sub-issues" header and "Add sub-issue" button
- Remove the sub-issues tab from the comments/activity tabs
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Image attachments now render in a 4-column grid with square aspect ratio
and center-cropped thumbnails. Clicking opens the existing gallery modal.
Hover reveals a trash icon; clicking it shows an inline confirmation
overlay before deleting. Non-image attachments retain the original list
layout.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
On desktop, the floating scroll-to-bottom button now shifts left
to stay clear of the properties panel when it's open (320px + margin).
Mobile positioning is unchanged.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
The DialogContent base class applies sm:max-w-lg which was overriding
the wider max-w setting. Use \!important to ensure the modal takes up
90% of viewport width.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Long branch/folder paths now wrap with break-all instead of truncating
and overflowing. Copy icon is always visible instead of hover-only,
since the sidebar is narrow and hover-reveal was hiding it behind overflow.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
- Make modal much wider (90vw) to show full document content
- Use monospace font in diff area for better readability
- Enable word-wrap with pre-wrap so long lines wrap cleanly
without breaking line number gutters
- Move revision selectors into a single row with colored
Old/New badges instead of stacked Left:/Right: labels
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Add a "View diff" option to the document three-dot menu (visible when
revision > 1) that opens a modal showing side-by-side changes between
revisions using react-diff-viewer-continued. Defaults to comparing the
current revision with its predecessor, with dropdowns to select any two
revisions.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Adds a new workspace section to the IssueProperties sidebar that
displays branch name and folder path (cwd) from the execution
workspace. Both values have copy-to-clipboard buttons and truncated
display with full path on hover.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
On mobile, the search input, tab selector, and "Show / hide columns" button
were all crammed into one row causing horizontal overflow. Now:
- Search appears as a full-width row above the tabs on mobile
- "Show / hide columns" button is hidden on mobile (columns are desktop-only)
- Desktop layout is unchanged
Co-Authored-By: Paperclip <noreply@paperclip.ing>
- Add overflow-hidden to the outer container to prevent horizontal scroll
- Add min-w-0 to grid children so long monospace content in inputs
respects container width instead of expanding it
- Truncate the workspace name heading for long names
- Add min-w-0 to the header name container
Co-Authored-By: Paperclip <noreply@paperclip.ing>
When unchecking the "Inherit project workspace runtime config" checkbox,
if the runtime config field is empty, automatically populate it with the
inherited config value so the user has a starting point to edit from.
Existing values are preserved and never overwritten.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
- Reduce card padding on small screens (p-4 → p-4 sm:p-5)
- Reduce spacing between sections on mobile (space-y-4 sm:space-y-6)
- Scale heading text (text-xl sm:text-2xl)
- Truncate long description on mobile, show full on sm+
- Reduce textarea min-heights on mobile (sm: prefix for larger sizes)
- Stack linked issue cards vertically on mobile, horizontal scroll on sm+
- Remove min-width constraint on linked issue cards on mobile
Co-Authored-By: Paperclip <noreply@paperclip.ing>
When dragging files like .zip onto the issue description editor, non-image
files are now uploaded as attachments instead of being silently ignored.
Images continue to be handled inline by MDXEditor's image plugin.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
The archive mutation was only using CSS opacity to hide items while the
network request was in flight. When the query refetch completed or the
archiving timer expired, the item could reappear. Now we optimistically
remove the item from React Query caches on mutate, snapshot previous
data for rollback on error, and sync with the server in onSettled.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
fixes https://github.com/paperclipai/paperclip/issues/2336
## Thinking Path
<!--
Required. Trace your reasoning from the top of the project down to this
specific change. Start with what Paperclip is, then narrow through the
subsystem, the problem, and why this PR exists. Use blockquote style.
Aim for 5–8 steps. See CONTRIBUTING.md for full examples.
-->
- Paperclip allows to manage projects
- During the project creation you can optionally enter a description
- In the project overview or configuration you can edit the description
- However, you cannot remove the description
- The user should be able to remove the project description because it's
an optional property
- This pull request fixes the frontend bug that prevented the user to
remove/clear the project description
## What Changed
<!-- Bullet list of concrete changes. One bullet per logical unit. -->
- project description can be cleared in "project configuration" and
"project overview"
## Verification
<!--
How can a reviewer confirm this works? Include test commands, manual
steps, or both. For UI changes, include before/after screenshots.
-->
In project configuration or project overview:
- In the description field remove/clear the text
## Risks
<!--
What could go wrong? Mention migration safety, breaking changes,
behavioral shifts, or "Low risk" if genuinely minor.
-->
- none
## Checklist
- [x] I have included a thinking path that traces from project context
to this change
- [x] I have run tests locally and they pass
- [x] I have added or updated tests where applicable
- [x] If this change affects the UI, I have included before/after
screenshots
- [x] I have updated relevant documentation to reflect my changes
- [x] I have considered and documented any risks above
- [x] I will address all Greptile and reviewer comments before
requesting merge
Closes#2412
Related: #2681, #498, #128
## Thinking Path
> - Paperclip orchestrates AI agents for zero-human companies
> - The Claude Code adapter spawns the `claude` CLI to run agent tasks
> - The adapter detects auth mode by checking for `ANTHROPIC_API_KEY` —
recognizing only "api" and "subscription" modes
> - But users running Claude Code via **AWS Bedrock**
(`CLAUDE_CODE_USE_BEDROCK=1`) fall through to the "subscription" path
> - This causes a misleading "ANTHROPIC_API_KEY is not set;
subscription-based auth can be used" message in the environment check
> - Additionally, the hello probe passes `--model claude-opus-4-6` which
is **not a valid Bedrock model identifier**, causing `400 The provided
model identifier is invalid` and a probe failure
> - This pull request adds Bedrock auth detection, skips the
Anthropic-style `--model` flag for Bedrock, and returns the correct
billing type
> - The benefit is that Bedrock users get a working environment check
and correct cost tracking out of the box
---
## Pain Point
Many enterprise teams use **Claude Code through AWS Bedrock** rather
than Anthropic's direct API — for compliance, billing consolidation, or
VPC requirements. Currently, these users hit a **hard wall during
onboarding**:
| Problem | Impact |
|---|---|
| ❌ Adapter environment check **always fails** | Users cannot create
their first agent — blocked at step 1 |
| ❌ `--model claude-opus-4-6` is **invalid on Bedrock** (requires
`us.anthropic.*` format) | Hello probe exits with code 1: `400 The
provided model identifier is invalid` |
| ❌ Auth shown as _"subscription-based"_ | Misleading — Bedrock is
neither subscription nor API-key auth |
| ❌ Quota polling hits Anthropic OAuth endpoint | Fails silently for
Bedrock users who have no Anthropic subscription |
> **Bottom line**: Paperclip is completely unusable for Bedrock users
out of the box.
## Why Bedrock Matters
AWS Bedrock is a major deployment path for Claude in enterprise
environments:
- **Enterprise compliance** — data stays within the customer's AWS
account and VPC
- **Unified billing** — Claude usage appears on the existing AWS
invoice, no separate Anthropic billing
- **IAM integration** — access controlled through AWS IAM roles and
policies
- **Regional deployment** — models run in the customer's preferred AWS
region
Supporting Bedrock unlocks Paperclip for organizations that **cannot**
use Anthropic's direct API due to procurement, security, or regulatory
constraints.
---
## What Changed
- **`execute.ts`**: Added `isBedrockAuth()` helper that checks
`CLAUDE_CODE_USE_BEDROCK` and `ANTHROPIC_BEDROCK_BASE_URL` env vars.
`resolveClaudeBillingType()` now returns `"metered_api"` for Bedrock.
Biller set to `"aws_bedrock"`. Skips `--model` flag when Bedrock is
active (Anthropic-style model IDs are invalid on Bedrock; the CLI uses
its own configured model).
- **`test.ts`**: Environment check now detects Bedrock env vars (from
adapter config or server env) and shows `"AWS Bedrock auth detected.
Claude will use Bedrock for inference."` instead of the misleading
subscription message. Also skips `--model` in the hello probe for
Bedrock.
- **`quota.ts`**: Early return with `{ ok: true, windows: [] }` when
Bedrock is active — Bedrock usage is billed through AWS, not Anthropic's
subscription quota system.
- **`ui/src/lib/utils.ts`**: Added `"aws_bedrock"` → `"AWS Bedrock"` to
`providerDisplayName()` and `quotaSourceDisplayName()`.
## Verification
1. `pnpm -r typecheck` — all packages pass
2. Unit tests added and passing (6/6)
3. Environment check with Bedrock env vars:
| | Before | After |
|---|---|---|
| **Status** | 🔴 Failed | ✅ Passed |
| **Auth message** | `ANTHROPIC_API_KEY is not set; subscription-based
auth can be used if Claude is logged in.` | `AWS Bedrock auth detected.
Claude will use Bedrock for inference.` |
| **Hello probe** | `ERROR · Claude hello probe failed.` (exit code 1 —
`--model claude-opus-4-6` is invalid on Bedrock) | `INFO · Claude hello
probe succeeded.` |
| **Screenshot** | <img height="500" alt="Screenshot 2026-04-05 at 8 25
27 AM"
src="https://github.com/user-attachments/assets/476431f6-6139-425a-8abc-97875d653657"
/> | <img height="500" alt="Screenshot 2026-04-05 at 8 31 58 AM"
src="https://github.com/user-attachments/assets/d388ce87-c5e6-4574-b8d2-fd8b86135299"
/> |
4. Existing API key / subscription paths are completely untouched unless
Bedrock env vars are present
## Risks
- **Low risk.** All changes are additive — existing "api" and
"subscription" code paths are only entered when Bedrock env vars are
absent.
- When Bedrock is active, the `--model` flag is skipped, so the
Paperclip model dropdown selection is ignored in favor of the Claude
CLI's own model config. This is intentional since Bedrock requires
different model identifiers.
## Model Used
- Claude Opus 4.6 (`claude-opus-4-6`, 1M context window) via Claude Code
CLI
## Checklist
- [x] I have included a thinking path that traces from project context
to this change
- [x] I have specified the model used (with version and capability
details)
- [x] I have run tests locally and they pass
- [x] I have added or updated tests where applicable
- [x] If this change affects the UI, I have included before/after
screenshots
- [x] I have updated relevant documentation to reflect my changes
- [x] I have considered and documented any risks above
- [x] I will address all Greptile and reviewer comments before
requesting merge
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Co-authored-by: greptile-apps[bot] <165735046+greptile-apps[bot]@users.noreply.github.com>
The Export and Import buttons in CompanySettings used plain <a href>
anchors which bypass the router's company-prefix wrapper. The links
resolved to /company/export and /company/import instead of
/:prefix/company/export, showing a 'Company not found' error.
Replace both <a href> elements with <Link to> from @/lib/router, which
calls applyCompanyPrefix under the hood and correctly resolves to
/:prefix/company/{export,import} regardless of which company is active.
Fixes: #2910
